Doing the maintenance work of NE50 bucket elevator is very important. It can prolong the service life and is convenient for safe operation. The methods are as follows：

One, DY series mobile belt conveyor product summary: DY type mobile belt conveyor is a continuous handling equipment with high efficiency, safe and reliable use, good mobility.

DY-450 is a removable single-deck filter sieve with lower noise and high efficiency. Because of one layer and one outlet, and the materials on layer should be removed by operator, the 450 filter sieve suit to the filtering of small capacity and little impurities. The following is the operation order of 450 filter sieve made by Dayong Machinery.

PP plastic rotary vibrating screen also called antiseptic rotary vibrating screen, plastic circular vibrating screen, polypropylene rotary vibrating screen. PP rotary vibrating screen produced by Xinxiang Dayong Vibration Equipment Co., Ltd. is used for solving some speical material that would be oxidated or corroded if contacted with Q235 and SUS304. The contacting marterial part of PP plastic rotary vibrating screen is polypropylene, which is the best project to solve the problem oxidation and corrosion. Besides, PP plastic also could ensure not influencing material's property.

On 13th, April, 2016, Xinxiang Dayong Machinery manufactured a DY-1500 rotary vibrating screen for a cellulose company in Zhejiang.

Matters Need Attention 1. Check before start: The machine should run without load. The operator should observe whether the move is normal, if it is, start with regular feeding to prevent the block on the pedestal. 2. Stop feeding before stop: The operator should stop feeding material before stop the bucket elevator until discharging whole material.

In the using vibrating screen process, the operator usually neglect the maintenance for vibrating screen and lead to different kinds malfunctions. So, how many causes result in malfunction ?

1. Box installation: The bucket elevator must be fixed on the firm concrete ground. The surface of the concrete ground shoukd be kept horizontal to guarantee the machine is vertical after fixed. The operator should install the bottom sections of bucket elevator, first to fix the foundation bolt, then install the middle box, finally to install the top box. The box should be kept vertical after installed, too. 2. Chains and hoppers installation: The hopper is connected with the U-type screws, which could be used as connector and the fasteners of the hoppers. Keep it in mind to make the U-type s

Rocking sieve has the best screening effect is in the world, screening the highest precision equipment,please check below information:

1. The function of damping spring. 2. The classification of damping spring.

Screw conveyor is divided into the shaft screw conveyor and the shaftless screw conveyor Shaft screw conveyor is mainly used for conveying powder and granular materials (such as chemical powder, cement, lime, grain, etc.); Shaftless screw conveyor is mainly used for viscous and winding material (viscous sludge, domestic waste).

With the conveying technology development of different type material, carbon steel screw conveyor is cannot able to meet the increasingly become multi-material needs,such as food grade and chemical grade, all kinds of corrosive, acid and alkali-type material . So there is a new type of screw conveyor-stainless steel is produced, stainless steel screw conveyors occupies a very important market share in today's market , but there are many model stainless steel screw conveyor, they also have different chemical properties,so we need find out which is best suited to it?

tumbler screen, buy tumbler screen products from global tumbler screen manufacturer and tumbler screen supplier at vibratingscreen.cc

As a special sieving machine in intra-industry, horizontal centrifugal sieve was widely used for sieving micro powder. The screen likes a cask set in the machine body. When the material enter into the horizontal centrifugal sieve, it will be mixed with air and be discharged by the vanes. Then the material would discharge by jetting from the outlet. The material cannot discharging would discharge from the larger outlet.

1. When installing, the pedestal should be keep level on the ground the error should not more than ±0.15. 2. The pedestal bolt should be locked well, no more loose. 3. Check whether the screw on the motor and table is loose. 4. Check whether the installation is correct, test run if it is. Then run with load when test run is normal.

1. Blocking of gyratory screen. 2. Abnormal movement such as torsional vibration. 3. Material mixing. 4. Capacity cannot reached.

1.The poor sealing between screen surface and frame. 2.The damage of screen surface. 3.Not suitable angle of vibration motor.

1. Why the feeding of material should be uniform ? 2. What will happen if cannot feed uniformly? 3. If the specific situation cannot make the feeding uniform, what should we do?

1. The exciter adopts eccentric block, not only enlarge the exciting force, but also adjust the exciting force as need. 2. This style machine is approach to simple, which is benefit to improve the manufacturing technology and fitting precision.

On 25th, December, 2015, Dayong machinery arranged a salesman to test the machine that had been sold.

1. Loose down the upper box, rubber seal ring and stretching screen ring. 2. Tile the new fine screen cloth on the frame. 3. Press the stretching screen ring from the fine screen cloth into the bottom circular groove.

1. Grading. 2. Liquid dislodgement. 3. Impurities dilodgement.

1. The belt slip. 2. The belt deviating.

1. This machine adopts two general motor or explosion-proof motor or frequency modulation motor. The exciting force is adjustable, the larger the exciting force is, the stronger the feeding ability is. 2. This machine adopts the flexible coupling between the exciter and motor, there are no shake on the motor.

1. Check whether choose the corresponding mesh screen cloth. The undersized mesh would lead to lower sieving precision. 2. Check whether the grand is stable. High inlet would make movement of material deviate to another side. 3. Check whether the screen cloth and outlet is level or overtop. Normally, it is level or over around 6mm. But according to different materials, the height is adjutable.