Your Position:Home > Faq

The reasons of material accumulating of vibration screen mesh surface

 The material accumulating of vibration screen mesh surface will seriously affect the screening accuracy. According to the 15 year R&D experience of Dayong Vibration Equipment Co., Ltd, we summarize the possible reasons of material accumulating of vibration screen mesh surface.
1, the customer doesn’t understand his own material and provide material to the vibration screen supplier for testing. The used screen is recommended by supplier and its mesh size is not accurate, which will cause the material accumulating on the mesh surface.
Solution: purchase a small amount of screen or check the screen independently. Send the material to the screen manufacturer for testing.
2The vibration screen chosen by customer is not normal factory equipment, whose technological process is not poor,
 
 
Solution: the price is not the only purchasing standard. Only the equipment quality is primary question we should consider. Xinxiang Dayong Vibration Equipment has independent research and development team. We provide the customer with over-long warranty of 18 months. Replace the motor in any quality problem with a new motor.
 
3The supplier didn’t give the client proper equipment debugging guidance. As the eccentric block angle debugged when leaving the factory is mostly large, it will cause material accumulating on the mesh surface.
 
 
Solution: contact the supplier and let him guide you to adjust the eccentric block angle.
 
4The equipment is placed in non-smooth at the customer’s site, which will cause the change of running trajectory of material. Then this will cause the material accumulating
 
 
Solution: place the equipment horizontally and check it regularly.
 
All the possibles above are provided by Xinxiang Dayong Vibration Equipment Co,. Ltd. Please contact the technical support directly for further understanding.

Chat Now
Contact
Email
Whatsapp