What should I do if the temperature of the vibrating screen is too high during operation?

 We all know that the vibrating screen does not have a fan device and relies on its own heat. However, the dust in the working environment of the vibrating screen is relatively large, and it is easy to accumulate on the surface of the vibrating screen for a long time. This will further affect its heat dissipation effect and easily cause motor failure. The actual heating temperature of the vibration motor part has a great influence on the insulation material of the vibration motor. Excessive temperature will cause insulation aging, shorten the life of the motor, and cause insulation damage. In order to prevent the insulation from aging and damage, the temperature of the vibration motor windings and other parts must be controlled. There is an irregular control. This temperature control is the allowable temperature of the vibration motor. So how to reduce the temperature of the vibrating screen?

1. Vibrating screening equipment working indoors or in a mining kiln environment should pay attention to the temperature adjustment of the room and the mining kiln, maintain good ventilation and air permeability, and ensure that the temperature does not exceed 40°C.

2. To prevent the vibration motor temperature of the core component of the vibrating screen from being too high, another important point is to choose a suitable vibration motor. Do not choose a small power motor just to save a few dollars. This will not only affect the screening efficiency, but also make the screen If the sub-quality is not up to standard, on the other hand, it will also cause the motor to run under load, causing the temperature to be too high and affecting the life of the vibrating screen.

3. The vibrating screening machinery should be prevented from being exposed to the hot sun for a long time. This environment will cause the screening equipment to age too quickly, and will also cause the temperature of the vibrating screening machinery to be too high and unable to work, affecting the screening efficiency. and screening quality. In severe cases, it will cause damage to the screen machine parts. Therefore, if your screen machine must be used outdoors, be sure to build a sun protection net or tarpaulin for the vibrating screening equipment.